PEMS 2022 Presentations | Center for Environmental Research and Technology

Click here to download all presentation files.

Day 1

Opening	Matthew Barth	1.0 Welcome and Opening Remarks.pdf (2.45 MB)
Keynote	Christopher Frey	1.1 Keynote - Role of Sensors and Data in an Integrated Transportation and One Health Approach.pdf (8.16 MB)
Government Policy	Roberto Gioria	1.2 Non-road Mobile Machinery in Service Monitoring Based on PEMS - JRC Experiences in the Development of the Regulatory Proposal.pdf (3.58 MB)
Government Policy	Scott Bacon	1.3 Mini-PEMS A Technical Review on What Is Needed for Using it as a Screening and Compliance Tool.pdf (2.96 MB)
Government Policy	Kent Johnson	1.4 Onboard Sensing, Analysis, and Reporting (OSAR).pdf (2.95 MB)
New Approaches	Imad A. Khalek	1.5 Laboratory Investigation of Exhaust NOxNH3 Sensors Under Steady-State and Transient Operation Using ECTO-LAB.pdf (2.14 MB)
New Approaches	Daisy Thomas	1.6 Performance Evaluation of a Mini-PEMS Results of Intercomparison Studies and Implications for its Potential.pdf (1.12 MB)
New Approaches	Chris Sharp	1.7 Low NOx Real-World Cycle PEMS and NOx Sensors.pdf (8.51 MB)
International Research Developments	Nick Molden	1.8 Easier, Cheaper, Deeper A Novel Approach to Tailpipe Emissions Measurement.pdf (1.27 MB)
International Research Developments	Ron Patrick	1.9 ECM’s Mini-PEMS and Micro-PEMS Systems and Components.pdf (7.17 MB)
International Research Developments	Ricardo Suarez-Bertoa	1.10 Measuring Emissions from Heavy-Duty Vehicles Under Real World Conditions Using On-board Sensors and Advanced Portable Instruments.pdf (2.01 MB)
International Research Developments	Phil Roberts	1.11 RDE Plus – Rapid Characterization of Vehicle and Powertrain Performance and Emissions Using Digital Twin, Powertrain-in-the-Loop a.pdf (10.23 MB)
International Research Developments	Susumu (Mu) Sato	1.12 Real World Emissions Analysis Using Sensor-Based Emissions Measurement System for Light-Duty Direct Injection Gasoline Vehicles.pdf (3.12 MB)
International Research Developments	David Mendez-Jimenez, Grace Johnson, Heejung Jung	1.13 The Influence of Portable and Built-in Ionizers on Ozone Concentration in Vehicle Cabins.pdf (763.3 KB)
International Research Developments	Scott Miers, Brian Eggart	1.14 Development of a Mini-PEMS with High HC Capacity.pdf (2.57 MB)
International Research Developments	Andre Luiz Silva Forcetto	1.15 Developing a Low-Cost PEMS for Flex Fuel Cars.pdf (3.95 MB)

Day 2

Research Development	Brenda Lopez, Kent Johnson, Heejung Jung	2.1 Brake Activity of a Heavy-Duty Vehicle.pdf (2.87 MB)
Research Development	Daisy Thomas	2.2 Mini-PEMS Use for Advanced Inspection and Maintenance Methods to Identify High Emitters.pdf (3.68 MB)
Research Development	Karl Ropkins	2.3 Collecting Real-World Evidence on Factors Affecting Bus Fleet Non-Exhaust Emissions.pdf (3 MB)
Research Development	Patrick Thompson	2.4 Low-Cost On-Board Electrostatic PM Sensing for Continous Compliance Monitoring and Geofencing.pdf (4.22 MB)
Research Development	Michael Sabisch	2.5 Opening the “CAN” – Exploiting the Wealth of Data Within a Vehicle’s ECM.pdf (1.88 MB)
Research Development	Hervé Borrel	2.6 Improved Vehicle Cabin Air Quality by Control of Air Recirculation Using Spatiotemporally-Resolved Interactive Map.pdf (1.95 MB)
Research Development	Ricardo Suarez-Bertoa	2.7 NOx Real World Emissions Measurements from a Euro 6d ISC Light-Duty Vehicle Using On-Board Sensors.pdf (2.07 MB)
New Methods	Andrew Burnette	2.8 Communication with Unfamiliar Off-Road Vehicle Controller Area Network (CAN) Systems in the Field.pdf (2.56 MB)
New Methods	Kent Johnson	2.9 Manfred Linke.pdf (4.52 MB)
New Methods	Shun Fukami	2.10 Advanced Portable Emissions Measurement System for New Measurement Components (NH3, N2O, and SPN10).pdf (3.58 MB)
International Research Developments	Kathryn Higgins	2.11 Community Level Environmental Policy Developments.pdf (6.66 MB)